Integrated Dell Remote Access Controller 9 RACADM CLI Guide

getremoteservicesstatus

Table 1. Details of getremoteservicesstatusThe following table provides details about the getremoteservicesstatus subcommand:
getremoteservicesstatus
Description	Displays the status of a system.
Synopsis	racadm getremoteservicesstatus
Input	racadm getremoteservicesstatus
Input	Possible values for the host system status Powered Off In POST Out of POST Collecting System Inventory Automated Task Execution Lifecycle Controller Unified Server Configurator Server has halted at F1/F2 error prompt because of a POST error Server has halted at F1/F2/F11 prompt because there are no bootable devices available Server has entered F2 setup menu Server has entered F11 Boot Manager menu Possible values for the for Lifecycle controller(LC) status Ready Not Initialized Reloading data Disabled In Recovery In Use Possible values for the real time status Ready Not ready Not Applicable NOTE:The real time status is displayed as Not Applicable if there are no real time capable controllers present on the system. Possible values for the overall status Ready Not ready Possible values for the Telemetry status Ready Not ready
Example	racadm getremoteservicesstatus