Integrated Dell Remote Access Controller 9 RACADM CLI Guide

spdm

Table 1. Details of spdmThe following table provides details about the spdm subcommand:
spdm
Description	The spdm command is used to display inventory of spdm capable devices, list spdm capable FQDDs, and to collect and export the hardware and software identity of spdm devices. NOTE:This command is enabled for Emulex cards only.
Synopsis	racadm spdm list racadm spdm <FQDD> racadm spdm export -f <filename> -c <FQDD> -t <identity cert type> -u <username> -p <password> -l <CIFS/NFS share>
Input	-f <filename>—File name -c <FQDD>—FQDD of SPDM device -t <identity cert type>—Type of identity t 0 — Hardware identity NOTE:SPDM command only supports hardware identification certificates. -u <username>—Username for the remote share where the file must be exported. Username in a domain can be given as domain/username. -p <password>—Password for the remote share where the file must be exported. -l <CIFS/NFS share>—Network share location where the SPDM identity must be exported.
Example	To list the FQDDs which are spdm capable: racadm spdm list To display the inventory of spdm capable devices: racadm spdm FC.Slot.1-1 To export the hardware identity to a remote CIFS share:: racadm spdm export -f MyCert.cert -c FC.Slot.1-1 -t 0 -u admin -p mypass -l //10.94.161.103/share To export the hardware identity to a remote NFS share:: racadm spdm export -f MyCert.cert -c FC.Slot.1-1 -t 0 -u admin -p mypass -l 10.94.161.103:/share