right-arrow key |
Use the right-arrow key to open a submenu, move
from a menu heading to the first submenu, or move to the first item
in that submenu. If you press the right-arrow key at a menu heading,
the submenu expands. Press it again to go to the first item in the
submenu. The right-arrow key is also used to close a menu list in
a popup window. Word wrap is supported. |
|
left-arrow key |
Use the left-arrow key to close a submenu, move
from a menu item to the menu heading for that item, or move from a
submenu to a higher level menu. If you press the left-arrow key at
a menu heading, the submenu collapses. Press it again to go to the
higher-level menu. Word wrap is supported. |
Controller 0 ← Disk Group 1 |
up-arrow key |
Use the up-arrow key to move to the upper menu
items within a menu or to a higher level menu. You can also use the
up-arrow key to close a menu list in a popup window, such as the stripe
element size menu. Word wrap is supported. |
Virtual Disk 1 ↑ Virtual Disk 4 |
down-arrow key |
Use the down-arrow key to move to the lower menu
items within a menu or to a lower level menu. You can also use the
down-arrow key to open a menu list in a popup window, such as the
stripe element size menu, and select a setting. Word wrap is supported. |
Virtual Disk 1 ↓ Virtual Disk 4 |
<Enter> |
After you highlight a menu item, press <Enter>
to select that item. An options menu for the menu item opens. It applies
to only certain menu items, such as Virtual Disk #. In a list of options for that item, such as the write policy for
a virtual disk, highlight a setting, such as Write-Through, and press <Enter> to select it. |
Select Add New VD and press
<Enter> to create a new virtual disk. |
<Esc> |
After you expand a pop-up window, press <Esc>
to close the window. You can continue to press <Esc> to exit the BIOS Configuration Utility (<Ctrl> <R>). |
Press <Esc> to return to the VD
Mgmt screen. |
<Tab> |
Press <Tab> to move the cursor to the next
control on a dialog box or page. |
Press <Tab> to move the cursor to the next parameter
you want to change. |
<Shift> <Tab> |
Press <Shift> <Tab> to move the cursor to
the previous control on a dialog or page. |
Press <Shift> <Tab> to move the cursor from Sort By to the previously selected PD in thePD Mgmt screen. |
<Ctrl> <N> |
Press <Ctrl> <N> to move to the next menu
screen among the main menu screens: VD Mgmt, PD Mgmt, Ctrl
Mgmt, and Foreign View. |
Press <Ctrl> <N> on the VD Mgmt screen to move to the PD Mgmt screen. |
<Ctrl> <P> |
Press <Ctrl> <P> to move to the previous
menu screen among the main menu screens: VD Mgmt, PD Mgmt,
Ctrl Mgmt, and Foreign View. |
Press <Ctrl> <P> on the PD Mgmt screen to move to the VD Mgmt screen. |
<F1> |
Press <F1> to accessHelp information. The Help screens display a glossary
of topics you can use to access information about navigation, RAID
levels, and general topics. |
<F1> |
<F2> |
Press <F2> to access the context menu, which
displays the list of options. |
<F2> |
<F5> |
Press <F5> to refresh the information on the
screen. |
<F5> |
<F11> |
Switch between two controllers. |
<F11> |
<F12> |
Press <F12> to display a list of controllers. |
<F12> |
Spacebar |
Press the <spacebar> to select an item. |
Press the <spacebar> to select or deselect
a controller setting in the Ctrl Mgmt View. |