Dell PowerEdge T620 Systems Owner's Manual

Removing The System Left Side Cover

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product.

NOTE: It is recommended that you always use a static mat and static strap while working on components in the interior of the system.

Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
Lay the system on its side.
Remove the screw securing the left side cover at the left front bottom of the chassis.
Remove the three screws securing the left side cover at the back end of the chassis.
Gently dislocate the cover by pushing up the cover from the bottom.
Remove the cover away from the system.
Figure 1. Removing and Installing the System Left Side Cover
1. left side cover
2. bottom screw
3. screws (3)