Dell PowerVault ME4 Series Storage System Deployment Guide

2U enclosure Ops panel

The front of the enclosure has an Ops panel that is located on the left ear flange of the 2U chassis.

The Ops panel is a part of the enclosure chassis, but is not replaceable on-site.

The Ops panel provides the functions that are shown and described in the following figure and table.

Table 1. Ops panel functions—2U enclosure front panel
No.	Indicator	Status
1	System power	Constant green: at least one PCM is supplying power Off: system not operating regardless of AC present
2	Status/Health	Constant blue: system is powered on and functioning normally Blinking blue (2 Hz): Enclosure management is busy, for example when booting or performing a firmware update Constant amber: module fault present Blinking amber: logical fault (2 s on, 1 s off)
3	Unit identification display	Green seven-segment display that shows the numerical position of the enclosure in the cabling sequence. The UID is also called the enclosure ID.
4	Identity	Blinking blue: system ID locator is activated (1 s on, 1 s off) Off: Normal state