Dell Precision 3930 Rack Service Manual

Removing the riser 1 dell ultraspeed drive duo card

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. Top cover
   2. Riser 1 module
3. Removing the riser 1 dell ultraspeed drive duo card:
   1. Pull the release tab [1], and open the riser 1 slot.
   2. Push the release tab on the PCIe slot [2], lift out the Dell Ultraspeed Drive Duo Card from slot [3].
      
4. To remove the SSD card
   1. Press the release latch on the Dell Ultraspeed Drive Duo Card cover [1], remove the one (M2x2.5) screw [2] and take out the SSD card [3].
      NOTE: If removing the Dell Ultraspeed Drive Duo Card permanently, install Riser1 blank in empty expansion slot 2 opening.