- Notes, cautions, and warnings
- Introduction
- New and enhanced features
- Minimum requirements to deploy and use Secure Connect Gateway
- Supported servers
- 16th generation PowerEdge servers
- 15th generation PowerEdge servers
- 14th generation PowerEdge servers
- 13th generation PowerEdge servers
- 12th generation PowerEdge servers
- 11th generation PowerEdge servers
- 10th generation PowerEdge servers
- 9th generation PowerEdge servers
- C series PowerEdge servers
- XE series PowerEdge servers
- XR series PowerEdge servers
- Datacenter Scalable Solutions
- AX nodes
- PowerVault devices
- Supported Integrated Remote Access Controllers (iDRAC)
- Supported chassis
- Supported data storage devices
- Supported networking switches
- Supported hypervisors
- Supported virtual machines
- Supported data protection devices
- Supported direct liquid cooling devices
- Supported converged and hyperconverged infrastructure appliances
- Supported systems management consoles
- Supported management and monitoring software
- Supported server operating systems and recommended OMSA version
- Support for OEM devices
- Secure Connect Gateway resources
- Contacting Dell Technologies
Secure Connect Gateway 5.x — Virtual Edition Support Matrix
PowerConnect switches
The following table lists the supported PowerConnect switches:
| Model | Latest supported OS version | Collection protocol | Ports used | Support notes |
|---|---|---|---|---|
| 2808, 2816, 2824, and 2842 | 1.x | SNMPv2 | 161 | — |
| 3524, 3524P, 3548P and 3548 | 2.x | SSH2 | 22 | — |
| 5424 and 5448 | 2.x | SSH2 | 22 | — |
| 6224 and 6248 | 3.3 | SSH2 | 22 | — |
| 6224F, 6224P, and 6248P | 3.3.14.2 | SSH2 | 22 and 161 | — |
| 7024, 7048, 7024F, 7024P, 7048P, and 7048R | 5.1 | SSH2 | 22 | — |
| 8024 and 8024F | 5.1 | SSH2 | 22 | — |
| 8132 and 8164F | 5.1 | SSH2 | 22 | — |
| B8000 | 7.0.1 | SSH2 | 22 | — |
| B8000E | 7.2.1 | SSH2 | 22 and 161 | — |
| M6220 | 5.1 | SSH2 | 22 | — |
| M6348 | 5.1 | SSH2 | 22 and 161 | — |
| M8024 | 5.1 | SSH2 | 22 | — |
| M8024-K | 5.1 | SSH2 | 22 | — |
| M8428-K | 6.3.1 | SSH2 | 22 | — |
| N1100 | 6.4.2 | SSH2 | 22 | Support for this model has been assessed based on secure connect gateway compatibility with similar models. |
| N1108EP-ON | 6.4.3 | SSH2 | 22 | — |
| N1148P-ON | 6.6 | SSH2 | 22 | — |
| N1500 | 6.5 | SSH2 | 22 | Support for these models has been assessed based on secure connect gateway compatibility with similar models. |
| N1524 | 6.5.1 | SSH2 | 22 | |
| N1524P | 6.5.1 | SSH2 | 22 | |
| N1548 | 6.5.1 | SSH2 | 22 | |
| N2000 | 6.3.2.3 | SSH2 | 22 | — |
| N2024 | 6.5.2 | SSH2 | 22 | — |
| N2100 | 6.3 | SSH2 | 22 | — |
| N2128PX-ON | 6.6 | SSH2 | 22 | — |
| N3000 | 6.2 | SSH2 | 22 | — |
| N3024, N3024P, N3048, and N3048P | 6.3 | SSH2 | 22 | — |
| N3024EF-ON | 6.6 | SSH2 | 22 | Support for these models has been assessed based on secure connect gateway compatibility with similar models. |
| N3024EP-ON | 6.6 | SSH2 | 22 | |
| N3024ET-ON | 6.5.2 | SSH2 | 22 | |
| N3024F | 6.3.9 | SSH2 | 22 | — |
| N3048EP-ON | 6.6 | SSH2 | 22 | Support for these models has been assessed based on secure connect gateway compatibility with similar models. |
| N3048ET-ON | 6.5.1 | SSH2 | 22 | |
| N3100 | 6.3 | SSH2 | 22 | — |
| N4032F-ON | 6.5.2 | SSH2 | 22 | Support for this model has been assessed based on secure connect gateway compatibility with similar models. |
| W-3200 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-3400 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-3600 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-6000 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-620 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-650 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-651 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| W-7210, W-7220, and W-7240 | 6.3 | SSH2 and SNMPv2 | 22 and 161 | — |
| X1008 and X1018P | 3.0.0.94 | SNMPv2 | 161 | — |
| X1026P and X4012 | 3.0.0.94 | SNMPv2 | 161 | — |
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\