SC460 Expansion Enclosure Owner's Manual

PDF

Secure the Expansion Enclosure Chassis and Top Cover in a Non-Standard Rack

Perform the following steps to secure the expansion enclosure in a rack that is not compatible with the semi-captive M5 shoulder screws.

Prerequisites

Identify the hardware used to secure an expansion enclosure in a non-standard rack.

Table 1. Identify the Hardware . Identify the mounting hardware
Part	Part Number	Description
	106-569-307	M5-0.8 clip nut (Quantity: 6) Used to secure the expansion enclosure chassis and top cover to a rack that does not have threaded holes
	036-032-010	M5-0.8 x 12 mm truss head Phillips screw with nylon patch (Quantity: 2) Used to secure the top cover of the expansion enclosure to a rack with M5 threaded holes
	036-032-011	M6-1.0 x 12 mm truss head Phillips screw with nylon patch (Quantity: 6) Used to secure the expansion enclosure chassis and top cover to a rack with M6 threaded holes
	036-032-009	#10-32 x 1/2 in. truss head Phillips screw with nylon patch (Quantity: 6) Used to secure the expansion enclosure chassis and top cover to a rack with #10-32 threaded holes
	036-032-012	#12-24 x 1/2 in. truss head Phillips screw with nylon patch (Quantity: 6) Used to secure the expansion enclosure chassis and top cover to a rack with #12-24 threaded holes

Steps

Remove the semi-captive M5 shoulder screws from the expansion enclosure chassis and top cover.
In a rack with without threaded holes, place M5 clip nuts into the mounting holes on the rack that line up with the holes on the expansion enclosure and top cover.
Secure the expansion enclosure and top cover to the rack using the appropriate truss head screws.