The Set System Information page allows you to enter Storage Center and storage controller configuration information to use when connecting
to the Storage Center using Storage Manager.
Steps
Type a descriptive name for the Storage Center in the Name field.
If the storage system is running Storage Center 7.3 or later, select the network configuration option from the Network Configuration Source drop-down menu.
DHCP IPv4 – Selected by
default. IP addresses will be discovered and assigned.
Static – Enter static
IP addresses manually.
If the network configuration source is set to Static:
Type the system management IPv4 address
for the Storage Center in the Virtual Management IPv4 Address field.
The management IPv4 address is the IP address used
to manage the Storage Center and
is different than a storage controller IPv4 address.
Type an IPv4 address for the management
port of each storage controller.
NOTE: The storage controller IPv4 addresses and management IPv4 address
must be within the same subnet.
Type the subnet mask of the management network
in the Subnet Mask field.
Type the gateway address of the management
network in the Gateway IPv4 Address field.
Type the domain name of the management network
in the Domain Name field.
Type the DNS server addresses of the management
network in the DNS Server and Secondary
DNS Server fields.
Click Next.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\