Dell Vostro 5370 Owners's Manual

Removing the Input Output board

1. Follow the procedure in Before working inside your computer.
2. Remove the:
   1. base cover
   2. solid-state drive(SSD)
   3. WLAN card
3. To remove the Input Output(I/O) board:
   1. Remove the two M2.5 x 6 screws that secure the left display hinge to the system [1].
   2. Lift the hinge [2].
   3. Lift the latch and, disconnect the I/O cable from the connector on the I/O board [3,4].
      
   4. Remove the two M2.0 x 2 screws that secure the I/O board to the system [1].
   5. Lift the I/O board away from the system.