Vostro 15 3510 Service Manual

PDF

Pre-boot Behavior

This section provides Pre-boot Behavior details and settings.

Table 1. Pre-boot Behavior Pre-boot Behavior
Options	Description
Adapter Warnings
Enable Adapter Warnings	This field contains a toggle switch to enable or disable warning messages during boot when adapters with low power capacity are detected (enabled by default).
Warning and Errors
Warning and Errors	This field allows the user to enable or disable boot process to be paused only when warnings or errors are detected. The options are as follows: Prompt on Warnings and Errors - Stop, prompt and wait for user input when warnings or errors are detected (selected by default) Continue on Warnings - Continue when warnings are detected but pause on errors Continue on Warnings and Errors - Continue when either warnings or errors are detected during POST
USB-C Warnings
Enable Dock Warning Messages	This field contains a toggle switch to enable or disable dock warning messages (enabled by default).
Fastboot
Fastboot	This field allows the user to configure the speed of the UEFI boot process. The options here are as follows: Minimal - reduces boot time by skipping certain hardware and configuration initialization during boot (selected by default) Thorough - Performs complete hardware and configuration initialization during boot Auto - Allows the BIOS to decide configuration initialization performed during boot
Extend BIOS POST Time
Extend BIOS POST Time	This field allows the user to configure the BIOS POST load time. The options are as follows: 0 seconds (selected by default) 5 seconds 10 seconds
MAC Address Pass-Through
MAC Address Pass-Through	This field allows the user to configure the MAC address pass-through replacing the external NIC MAC address.: System Unique MAC Address (selected by default) Integrated NIC 1 MAC Address Disabled