DP 1.4/HDMI 2.0/MFDP Type-C/TBT Type-C: 4K (3840 x 2160) @60Hz
DP 1.4 + DP 1.4: 4K (3840 x 2160) @60 Hz
DP 1.4 + HDMI 2.0: 4K (3840 x 2160) @60 Hz
DP 1.4 + MFDP Type-C: 4K (3840 x 2160) @60 Hz
DP 1.4 + TBT Type-C:
1 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
HDMI 2.0 + TBT Type-C:
1 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
MFDP Type-C + TBT Type-C:
1 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
DP 1.4 + DP 1.4 + HDMI 2.0:
3 x 4K (3840 x 2160) @60 Hz
DP 1.4 + DP 1.4 + MFDP Type-C:
3 x 4K (3840 x 2160) @60 Hz
DP 1.4 + DP 1.4 + TBT Type-C:
2 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
DP 1.4 + MFDP Type-C + TBT Type-C:
2 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
DP 1.4 + HDMI 2.0 + TBT Type-C:
2 x 4K (3840 x 2160) @60 Hz
1 x QHD (2560 x 1440) @60 Hz
DP 1.4 + DP 1.4 + HDMI 2.0 + TBT Type-C:
3 x 4K (3840 x 2160) @60 Hz + 1 x QHD (2560 x 1440) @60 Hz
or
3 x 4K (3840 x 2160) @60 Hz + 1 x 4K (3840 x 2160) @30 Hz
DP 1.4 + DP 1.4 + MFDP Type-C + TBT Type-C:
3 x 4K (3840 x 2160) @60 Hz + 1 x QHD (2560 x 1440) @60 Hz
or
3 x 4K (3840 x 2160) @60 Hz + 1 x 4K (3840 x 2160) @30 Hz
DP 1.4 + DP 1.4 + HDMI 2.0:
4 x 4K (3840 x 2160) @60 Hz
NOTE:The fourth display must be a 4K DSC monitor daisy-chained through one of the monitors connected to the DP 1.4 port.
DP 1.4 + DP 1.4 + MFDP Type-C:
4 x 4K (3840 x 2160) @60 Hz
NOTE:The fourth display must be a 4K DSC monitor daisy-chained through one of the monitors connected to the DP 1.4 port.
DP 1.4 + DP 1.4 + TBT Type-C:
4 x 4K (3840 x 2160) @60 Hz
NOTE:The fourth display must be a 4K DSC monitor daisy-chained through one of the monitors connected to the DP 1.4 port.
DP 1.4 + DP 1.4 + HDMI 2.0 + TBT Type-C:
4 x 4K (3840 x 2160) @60 Hz
NOTE: The TBT port must be connected to a DSC-capable 4K monitor.
DP 1.4 + DP 1.4 + MFDP Type-C + TBT Type-C:
4 x 4K (3840 x 2160) @60 Hz
NOTE: The TBT port must be connected to a DSC-capable 4K monitor.
DP 1.4 x 2 (daisy-chain) + DP 1.4 x 2 (daisy-chain):
4 x 4K (3840 x 2160) @60 Hz - all four monitors should support DSC.
Port disablement
Table 3. Port disablementThe following table provides details on the display ports that do not function with certain display ports are connected to external displays:
Ports connected to display
Ports disabled
Two DisplayPort 1.4 ports (rear)
One HDMI 2.0 port (rear)
One Thunderbolt 4 port (rear)
Second Thunderbolt 4 Type-C port supports data only (rear)
Two Thunderbolt 4 Type-C port (rear)
Two DisplayPort 1.4 ports (rear)
One HDMI 2.0 port (rear)
One USB 3.2 Gen 2 Type-C port with DisplayPort 1.4 Alt Mode
Important
NOTE:HDMI 2.0 and MFDP (Multi-Function DisplayPort) Type-C ports on the back of are toggled. HDMI 2.0 and MFDP Type-C cannot support dual monitors simultaneously. Only one of these ports can be used at a time.
NOTE:If higher resolution monitors are used, the Graphics driver makes a judgment based on monitor specifications and display configurations. Some resolutions may not be supported and so will be removed from the Windows Display Control Panel.
NOTE:Linux operating system is unable to physically turn-off built-in display, the external display numbers will be one less than the display numbers listed in above tables.
NOTE:Resolution support is also dependent on the monitor’s Extended Display Identification Data (EDID) resolution.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\