Dell Wyse 5070 Extended Thin Client User Guide

Setting up the thin client

This section explains how to setup the Wyse 5070 extended thin client on premise.

The Wyse 5070 extended thin client can be setup with any one of the operating systems at your work place:

To set up the Wyse 5070 extended thin client, do the following:

Install the stand.
Figure 1. Install the stand
Connect the keyboard and mouse.
Figure 2. Install keyboard and mouse
Connect the network cable.
Figure 3. Connect the network cable
Connect the display and press the power button.
NOTE The Wyse 5070 thin client must be mounted only on a vertical orientation.
Figure 4. Connect the display
Connect the power cable and route the power cable through the cable clip, and press the power button.
Figure 5. Connect the power cable