Dell Wyse Management Suite Version 1.3 Administrator’s Guide

PDF

Configuring WLAN connections

Use the WLAN Connections page to configure the thin client WLAN connections for ThinOS 8.5 and later version devices.

Table 1. Configuring authentication settingsAuthentication settings
Option	Description
Security Type	Select this option to specify the authentication method. From the drop-down menu, select any one of the following options: Open Open(WEP) SharedKey WPA-Personal WPA-Enterprise WPA2-Personal WPA2-Enterprise
Encryption	This option is applicable only for Open(WEP), SharedKey, WPA-Personal, and WPA-Enterprise. From the drop-down menu, select your preferred option.
Web Key 1,2,3, and 4	This option is applicable only for Open(WEP) and SharedKey. From the drop-down menu, select your preferred option.
WPA Key	This option is applicable only for WPA-Personal and WPA2-Personal. Enter the WPA key in the provided field.
Network Type	This option is applicable only for WPA-Personal, WPA-Enterprise, WPA2-Personal, and WPA2-Enterprise. From the drop-down menu, select your preferred option.

Table 2. Configuring basic settingsBasic settings
Option	Description
SSID	Enter the name of the Service Set Identifier (SSID) connection.
Mode	From the drop-down menu, select the type of mode based on your requirement.

Table 3. Configuring IEEE 802.1X settings for WPA-Enterprise and WPA2-EnterpriseIEEE 802.1X settings
Option	Description
EAP Type	From the drop-down menu, select your preferred option.
FAST Type	This option is applicable only for EAP-FAST[8.3]. From the drop-down menu, select your preferred option.
LEAP user name	This option is applicable only for EAP-LEAP. Enter the leap user name in the provided field.
LEAP Password	This option is applicable only for EAP-LEAP. Enter the leap password in the provided field.
Server Validate	This option is applicable only for EAP-TLS and EAP-PEAP. Select the check box to validate the sever connection.
Server Check	This option is applicable only for EAP-TLS and EAP-PEAP. Select the check box to check the sever connection.
Server Name	This option is applicable only for EAP-TLS and EAP-PEAP. Enter the server name.
Client Certificate Filename	This option is applicable only for EAP-TLS. Enter the client certificate file name.
PrivateKey Client Certificate Password	This option is applicable only for EAP-TLS. Enter the private key client certificate password in the provided field.
TLS Authentication Type	This option is applicable only for EAP-TLS. From the drop-down menu, select your preferred option.
PEAP TLS Version	This option is applicable only for EAP-TLS. From the drop-down menu, select your preferred option.
PEAP Type	This option is applicable only for EAP-PEAP. From the drop-down menu, select your preferred option.
EAP Identity	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Enter the EAP identity.
user name	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Enter the user name.
Password	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Enter the password.
Hide Domain	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Select the check box to hide the domain.
Domain	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Enter the domain name.
Enable Single Signon	This option is applicable only for EAP-PEAP and EAP-FAST[8.3]. Select the check box to enable the single sign on functionality.