Dell Wyse ThinOS Version 8.6 Administrator’s Guide

Configuring Citrix NetScaler Gateway using LDAP and RSA

1. Go to NetScaler > NetScaler Gateway > Virtual Servers, and click Edit.
2. Set the primary and secondary authentications based on the following scenarios:
   • If you use LDAP and RSA login, ensure that the primary authentication is LDAP and secondary authentication is RADIUS.
   • If you use RSA and LDAP login, ensure that the primary authentication is RSA and secondary authentication is LDAP.
   • If you use only LDAP login, ensure that the primary authentication is LDAP and secondary authentication is none.
3. Add the following INI parameter in the wnos.ini file, and configure your file server:
   pnliteserver=<fqdn of NS Server> CAGAuthMethod={LDAP,LDAP+RSA,RSA+LDAP} Storefront={yes,no}