For example,
Wyse_3040_version.bin. The BIOS version may be updated in each release. For the latest version of BIOS, refer to the latest Dell Wyse ThinOS Release Notes.
Rename the Dell BIOS file as
A10Q_bios.bin.
Upload the renamed BIOS file to folder
WNOS in the https server.
Ensure that the INI parameter
autoload is enabled for firmware update in
WNOS.INI.
Restart the thin client.
BIOS is updated automatically.
To verify whether the new BIOS is updated correctly, from the desktop menu, click the
System Information option, or click the
System Information icon in zero mode. In the
Event Log tab, the BIOS version log is displayed.
For example,
System Version: 8.5_017 (ROM 1.2.1).
This log indicates that the BIOS version is updated to v1.2.1.
BIOS version can be viewed on the BIOS setup screen. To access the BIOS setup, do the following:
Restart the thin client, and during system boot press the
F2 key.
Enter the BIOS password, if admin password is set.
Click
Settings
> General > System Information.
The BIOS version is displayed on the screen.
BIOS can be updated by using the Wyse Management Suite console. For more information about Wyse Management Suite, see Dell Wyse Management Suite Administrator's Guide.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\