Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits

Alienware m15 R3 Service Manual

Removing the palmrest

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.
  4. Remove the M.2 2230 solid-state drive. (if applicable)
  5. Remove the M.2 2280 solid-state drive. (if applicable)
  6. Remove the rear I/O-cover.
  7. Remove the display assembly.
  8. Remove the speakers.
  9. Remove the touchpad.
  10. Remove the keyboard-controller board.
  11. Remove the right I/O-board.
  12. Follow the procedure from step 1 to step 19 in Removing the system board.
  13. Remove the power-adapter port.
  14. Remove the power-button assembly.
  15. Remove the keyboard.

About this task

The following image(s) indicate the location of the palmrest and provides a visual representation of the removal procedure.

Removing the palmrest

Steps

After performing the pre-requisites, you are left with the palmrest.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\