Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Profitez de récompenses et de remises réservées aux membres
  • Créez et accédez à une liste de vos produits

Alienware m15 R3 Service Manual

Removing the touchpad

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.

About this task

The following image(s) indicate the location of the touchpad and provides a visual representation of the removal procedure.

Removing the touchpad

Steps

  1. Open the latch and disconnect the keyboard-controller board-cable from keyboard-controller board.
  2. Lift the keyboard-controller board-cable off the palm-rest assembly.
  3. Open the latch and disconnect the keyboard cable from the keyboard-controller board.
  4. Fold up the keyboard cable.
  5. Open the latch and disconnect the touchpad cable from the touchpad.
  6. Lift the touchpad cable from the palm-rest assembly.
  7. Remove the four (M2x1.9) screws that secure the touchpad to the palm-rest assembly.
  8. Lift the touchpad off the palm-rest assembly.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\