Endpoint Security Suite Pro Advanced Installation Guide v1.8

• Threat Protection and Advanced Threat Prevention cannot reside on the same computer. Do not install both of these components on the same computer, as compatibility issues will occur. If you wish to install Advanced Threat Prevention, download the Endpoint Security Suite Enterprise Advanced Installation Guide for instructions.
• The installers must be run in a specific order. Failure to install the components in the proper order will result in installation failure. Run the installers in the following order:

1. \Advanced Authentication (Threat Protection needs the Dell Encryption Management Agent component).
2. \Advanced Authentication (Advanced Authentication and Auth should be installed together)
3. The Encryption client is required with the Threat Protection components. Go to Example Command Line for an example installation.
4. Threat Protection Clients, as shown in Command Line Installation.

• The SED and Advanced Authentication client installers can be located at:

  • From Your Dell FTP Account - Locate the installation bundle at Endpoint-Security-Suite-1.x.x.xxx.zip and then Extract the Child Installers from the Master Installer. After extraction, locate the file at C:\extracted\Encryption Management Agent and C:\extracted\Advanced Authentication\<x64/x86> .

• The Encryption client installer can be located at:

  • From Your Dell FTP Account - Locate the installation bundle at Endpoint-Security-Suite-1.x.x.xxx.zip and then Extract the Child Installers from the Master Installer. After extraction, locate the file at C:\extracted\Encryption .

• The Threat Protection client installers can be located at:

  • From Your Dell FTP Account - Locate the installation bundle at Endpoint-Security-Suite-1.x.x.xxx.zip and then Extract the Child Installers from the Master Installer. After extraction, locate the file at C:\extracted\Threat Protection .

Command Line Installation

• The following table details the parameters available for the EnsMgmtSdkInstaller.exe file.

  Parameters	Description
  LoadCert	Load the certificate at the specified directory.

• The following table details the parameters available for the EPsetup.exe file.

  Parameters	Description
  ADDLOCAL=" tp,fw,wc"	Identifies the modules to install: tp=Threat Protection fw=Client Firewall wc=Web Protection NOTE: All three modules must be installed.
  override "hips"	Do not install Host Intrusion Prevention
  INSTALLDIR	Non-default installation location
  nocontentupdate	Tells the installer not to update content files automatically as part of the installation process. Dell recommends scheduling an update as soon as installation has completed.
  nopreservesettings	Do not save settings.

• The following table details the parameters available for the DellThreatProtection.msi file.

  Parameters	Description
  Reboot=ReallySuppress	Suppresses the reboot.
  ARP	0=No entry in Add/Remove Programs 1=Entry in Add/Remove Programs

• The following table details the parameters available for the EnsMgmtSdkInstaller.exe file.

  Parameters	Description
  ProtectProcesses	Specify the file name and location of processes to protect.
  InstallSDK	Installs the SDK at the specified location.
  RemoveRightClick	Removes the right-click menu option for end users.
  RemoveMcTray	Removes the system tray.

  Example Command Line

  \Threat Protection\SDK

• The following command line loads the certificate default parameters.

  "Threat Protection\SDK\EnsMgmtSdkInstaller.exe" -LoadCert >"C:\ProgramData\Dell\Dell Data Protection\Installer Logs\McAfeeSDKInstallerBeforeEndPoint.log"
  • NOTE:

    This installer can be skipped if upgrading.

  Then:

  \Threat Protection\EndPointSecurity

• The following example installs the Threat Protection, Web Protection, and Client Firewall with default parameters (silent mode, install Threat Protection, Client Firewall, and Web Protection, override the Host Intrusion Prevention, no content update, no settings saved).

  "Threat Protection\EndPointSecurity\EPsetup.exe" ADDLOCAL="tp,fw,wc" /override"hips" /nocontentupdate /nopreservesettings /qn

  Then:

  \Threat Protection\ThreatProtection\WinXXR

• The following example installs the client with default parameters (suppress the reboot, no dialogue, no progress bar, no entry in the Control Panel Programs list).

  "Threat Protection\ThreatProtection\WinXXR\DellThreatProtection.msi" /qn REBOOT=ReallySuppress ARPSYSTEMCOMPONENT=1

  \Threat Protection\SDK

• The following example installs the Threat Protection SDK.

  "Threat Protection\SDK\EnsMgmtSdkInstaller.exe" -ProtectProcesses "C:\Program Files\Dell\Dell Data Protection\Threat Protection\DellAVAgent.exe" -InstallSDK -RemoveRightClick -RemoveMcTray >"C:\ProgramData\Dell\Dell Data Protection\Installer Logs\McAfeeSDKInstallerAfterEndPoint.log"