Pular para o conteúdo principal
Sair

Boas-vindas à Dell

Minha conta
  • Faça pedidos de forma rápida e simples
  • Visualize os pedidos e acompanhe o status de envio
  • Crie e acesse uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.
Login Crie sua conta Premier login Inscrição no programa de parceria
Fale Conosco

Seus carrinhos no Dell.com

Dell PowerEdge R730xd Owner's Manual

PDF

Installing an NVMe expansion card into the expansion card riser

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. Unpack the expansion card, and prepare it for installation.
    For instructions, see the documentation accompanying the card.
  2. Lift the expansion card latch, and remove the filler bracket.
  3. Holding the card by its edges, position the card so that the connector on the expansion card aligns with the expansion card connector on the riser.
  4. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
  5. Press the touch points to open the expansion card locking tabs.
  6. Close the expansion card latch.
    Figure 1. Installing an expansion card into the expansion card riser
    This image shows how to install an NVMe expansion card into the expansion card riser.
    1. Expansion card connector
    2. Expansion card
    3. Expansion card release latch
    4. Expansion card riser
    5. Power connector
    6. Expansion card riser locking latch

Next steps

  1. Follow the procedure listed in the After working inside your system section.
  2. Install any device drivers required for the card as described in the documentation for the card.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\