The system/server module may contain one main system
chassis or several chassis. The main system chassis/main system contains
the essential components of a system. The Main System Chassis/Main
System object action window includes the following:
Properties
Subtabs: Health | Information | System Components
(FRU) | Front Panel
Under the Properties tab, you can:
View the health or status of hardware components
and sensors. Each listed component has a System/Server Module
Component Status Indicators icon next to its name. indicates that a component is healthy
(normal). indicates that a component has a warning (noncritical)
condition and requires prompt attention. indicates that a component has a failure (critical)
condition and requires immediate attention. indicates that a component's health status is unknown. The
available monitored components include:
NOTE: Batteries are
supported only on Dell’s 10th generation PowerEdge systems. The Power supplies are not available on Dell PowerEdge 1900. Power Management is supported on limited Dell’s 10th
generation PowerEdge systems. Power Supply Monitoring and Power Monitoring features are available
only for systems that have two or more redundant, hot-swappable powers
supplies installed. These features are unavailable for permanently
installed, nonredundant power supplies that lack power management
circuitry.
NOTE: If the QLogic
QLE2460 4Gb Single-Port Fibre Channel HBA, QLogic QLE2462 4Gb Dual-Port
Fibre Channel HBA, Qlogic QLE2562 Dual Port FC8 Adapter, or Qlogic
QLE2560 Single Port FC8 Adapter cards are installed on Dell’s 12th
generation PowerEdge systems, the System Components (FRU) screen is not displayed.
View information about the main system chassis attributes
such as the host name, iDRAC version, Lifecycle Controller version,
Chassis Model, Chassis Lock, Chassis Service Tag, Express Service
Code, and Chassis Asset Tag. The Express Service Code (ESC) attribute
is an 11-digit numeric-only conversion of the Dell system Service
Tag. When calling Dell Technical Support, you can key in the ESC for
auto call routing.
View detailed information about the field-replaceable
units (FRUs) installed in your system (under the System Components (FRU) sub tab).
Enable or disable the managed system's front panel
buttons, namely Power button and Non-Masking Interrupt (NMI) button
(if present on the system). Also, select the managed system’s LCD
Security Access level. The managed system’s LCD information can be
selected from the drop-down menu. You can also enable Indication of
Remote KVM session from the Front Panel sub tab.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\