The system supports DDR4 registered DIMMs (RDIMMs) and load reduced
DIMMs (LRDIMMs). System memory
holds the instructions that are executed by the processor.
NOTE:MT/s indicates DIMM
speed in MegaTransfers per second.
Memory bus operating frequency can be 2133 MT/s, 2400
MT/s, or 2666 MT/s depending on the following factors:
DIMM type
(RDIMM or LRDIMM)
Number of
DIMMs populated per channel
System profile
selected (for example, Performance Optimized, Custom, or Dense Configuration
Optimized)
Maximum
supported DIMM frequency of the processors
Your system contains 24 memory sockets split into
two sets of 12 sockets, one set per processor. Each 12-sockets is organized into six channels. Two sockets per channel with the release tabs of the first socket marked white and the second socket black.
NOTE:DIMMs in sockets A1 to A12 are assigned to processor 1 and DIMMs in sockets B1 to B12 are assigned to processor 2.
Table 1. Maximum memory moduleTable describes Maximum memory module
Frequency supported
Processors
2133
31xx series
2400
41xx series
2400
51xx series
2666
61xx series
Memory channels are organized as follows:
Table 2. Memory channelsThis tables describes memory channels and how the
channels are organized.
Processor
Channel 0
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
CPU 1
Slots A1, A7
Slots A2, A8
Slots A3, A9
Slots A4, A10
Slots B5, A11
Slots A6, A12
CPU2
Slots B1, B7
Slots B2, B8
Slots B3, B9
Slots B4, B10
Slots B5, B11
Slots B6, B12
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\