Dell Wyse Management Suite Version 1.3 Administrator’s Guide

PDF

Configuring general settings

Use this page to configure the thin client firmware upgrade settings, such as live upgrade, firmware update logic, and platform firmware mappings.

NOTE:

Remote firmware imaging from the cloud is supported with the ThinOS firmware version 8.0_037 or later.

Table 1. Configuring Sign-on settingsSign-on Settings
Option	Description
Domain List (8.5+)	Enter the list of domains to sign-in to the broker server. Separate the names by a semi-colon.

Table 2. Firmware upgradeFirmware Upgrade
Option	Description
Disable Live Upgrade	Live Upgrade enables the thin client immediately after download and applies the new firmware based on defined policies. If you prefer that the thin client should only check for new firmware on each boot, then disable the Live Upgrade feature.
Define desired platform or firmware mappings	This option maps the specific firmware versions to different platform types. To map a platform type to a specific firmware version, do the following: From the Platform Type drop-down menu, select a platform. From the Firmware to auto-deploy drop-down menu, select a firmware version. The list of platform types and the number of firmware versions currently uploaded to the File Repository Inventory page are displayed.

Table 3. Configuring local resourcesLocal Resources
Option	Description
Map SmartCards	Select this option to redirect the smart cards into the remote session.
Enable USB Redirection	Select this option to enable USB redirection on the devices. From the drop-down menu, select your preferred option.
Exclude disk devices	Select this option to exclude the disk devices.
Exclude audio devices	Select this option to exclude the audio devices.
Exclude printer devices	Select this option to exclude the printer devices.
Exclude video devices	Select this option to exclude the video devices.