Dell Wyse Management Suite Version 1.3 Administrator’s Guide

Configuring video settings

Use the Video page to configure the video settings.

Table 1. Configure video settingsConfiguring video settings
Option	Description
Minimum Image Quality	Enables you to change the image quality and frame rate when network bandwidth is limited. Some use cases may require lower-quality images at a higher frame rate while others need higher-quality images at a lower frame rate. In environments where the network bandwidth is constrained, select Reduced to enable higher frame rates. Select towards Perception-Free to enable higher image quality. When network bandwidth is not constrained, the PCoIP system maintains perception-free quality regardless of the Minimum Image Quality parameter. Note: The Maximum Initial Image Quality must be greater than or equal to the Minimum Image Quality.
Maximum Image Quality	Select towards Reduced to reduce the network bandwidth peaks caused by screen content changes, but produce lower quality images. Select towards Perception-Free to produce higher quality images but also higher bandwidth peaks. This parameter limits the initial quality on the first display frame of the screen change. Unchanged regions of the image are built to a lossless state regardless of this parameter. Note: The Maximum Initial Image Quality must be greater than or equal to the Minimum Image Quality.
Enable local cursor	When enabled, the Tera2PCoIP Zero Client always shows the local cursor. When disabled, the local cursor is only shown when the host requests it or a locally-terminated mouse is connected.