Dell XC Core XC660

DSA-2020-147: Dell Server Platform Security Advisory for the 2020.1 Intel Platform Updates (June 2020) - Intel SSD - CVE-2020-0527

Dell EMC guidance to mitigate risk and resolution for the iDRAC multiple vulnerabilities. For specific information about affected iDRAC versions and next steps to apply the updates, see this guide.

A power‑off occurs when the inlet temperature exceeds the critical limit because the alert action is configured to shut down; the temperature condition itself does not trigger an automatic shutdown.

Dell PowerEdge Server remediation is available for OpenSSL Vulnerabilities that could be exploited by malicious users to compromise the affected systems.

Dell iDRAC9 remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This Knowledge Base article explains the steps to take when the VxRail (Virtual Extensible Infrastructure) alarm VXR01406E / MYSTIC01406E – Virtual SAN (Storage Area Network) Health Alarm ‘Advanced Virtual SAN configuration in sync’ is triggered.

This article provides guidance for Dell PowerEdge servers requiring remediation for the Microsoft Secure Boot certificate expiration (June 2026).

Dell PowerEdge Server remediation is available for 2026.1 Intel Platform Update (IPU) components that could be exploited by malicious users to compromise the affected systems.

PowerEdge 16G BOSS N1; logs VLT0204 (BOSS CPLD voltage out of range) or VLT0205 on PowerEdge T160/R360/T360/R260 platforms running Complex Programmable Logic Device (CPLD) version 1.4.0. PowerEdge R660 and R760 platforms running CPLD versions v1.2.6 will not log any voltage out of range warnings in the LC or SEL logs.

Summary of the enhanced vMotion Compatibility (EVC) mode

NVP-vProxy: Image recovery to VxRail failing when VMware stops the operation because datastore is marked as out of space.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

Micron 7450 NVMe drive is not recognized by Nutanix Prism after drive is hotplug inserted.

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

CPUs can be perceived to be hot while server is idle.

When a PS1010 or PS1030 NVMe SSD is installed, a PSOD may occur during production or gathering Operating System (OS) logs.

Seagate Skybolt and SkyboltServoBP drive fails with medium format corrupted errors.

Updating 16G PowerEdge Server BIOS may result in Secure Boot database updates.

Cluster creation or expansion of an existing cluster fails if the minimum software versions are not met.

Dell Samsung Serial Attached SCSI (SAS) PM1653 and PM1655 solid state drives may report excessive Sense Key faults 0x3, 0x11, 0x0, or 0x4, 0x29, 0x4. These faults have the potential to cause unexpected drive issues.

This article explains how to perform a password management task in VCF environment when it is not possible with the error: "Password management operation failed in prevalidation stage"

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

XC nodes that are equipped with Mellanox CX4-Lx or Mellanox CX5 network devices fail to complete Nutanix Life Cycle Manager (LCM) updates due to out-of-date firmware that requires an intermediate firmware update to be applied first.

When spare capacity in PowerFlex is smaller than the size of the largest Fault Set, PowerFlex alerts the user. Increasing the spare capacity helps clear this alert.

iDRAC Service Module (iSM) versions 4.0.1 and earlier for VMware ESXi may stop functioning and the dcism service stop if the core hostd service of the ESXi host was recently restarted.

Security Scan run against an XC Series solution may report a CVE-2013-4786 vulnerability against the iDRAC.

This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.

Dell PowerEdge Server remediation is available for an OpenSSL Vulnerability that could be exploited by malicious users to compromise the affected systems.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.