OEMR T340

The article describes updating Dell PowerEdge server firmware through Integrated Dell Remote Access Controller (iDRAC) 7, 8, 9, or 10. It details downloading the firmware image, logging in to the iDRAC web interface, uploading the image for installation, and managing pending updates.

This article details the procedure to troubleshoot power supply unit (PSU) issues that may arise on a PowerEdge Server.

Frequently Asked Questions (FAQ) about Physical Drives replacement in RAID Server and MD Arrays

Toshiba AL15SE HDDs may enter a Drive Not Ready (DNR) state and report repeated seek retries associated with sense codes 04-4C-91, 04-4C-95, 04-4C-E0, or 04-44-82.

This article explains what a predictive drive failure (error code PDR16) means, why it occurs, and provides step-by-step instructions to troubleshoot and resolve the issue. It covers recommended actions such as backing up data, updating firmware, and replacing the disk if necessary to ensure storage health and prevent data loss.

Learn how to create a bootable USB with Rufus to update Dell PowerEdge servers and format the drive. Follow the step-by-step instructions to prepare and create a bootable USB media.

Systems Management How to Video that Covers the Process of Installing and Registering the OpenManage Enterprise Integration for VMware vCenter (OMEVV) plug-in.

Micron 5x00 Series SSDs may experience read/write performance degradation after reaching approximately 65,535 power-on hours (POH), which equates to roughly 7.5 years of operation. This issue affects performance only and does not result in data loss or drive failure.

In iDRAC9 6.xx series firmware the Java, ActiveX, and HTML5 plug-in types for virtual console are no longer available.

Legacy Summit drives with Product Part ID (PPID) revision A03 or earlier run SxS9 firmware and can be upgraded to SxSA, but the upgrade is not recommended because SxSA is intended for drives with the updated preamp hardware; drives with PPID revision A04 or later must use SxSA or later and downgrading is unsupported.

This article explains how to update the BIOS version of a Dell PowerEdge Server using EFI file. The update can be done directly from the Unified Extensible Firmware Interface (UEFI) interface.

Find answers and resources to get started or do more from your MyService360 dashboard with enterprise services data analytics and visualizations.

Dell iDRAC9 and iDRAC10 remediations for an OpenSSH security vulnerability that could be exploited by malicious users to compromise the affected system.

Correctable and uncorrectable memory errors on PowerEdge Server with DDR4 and changes to troubleshooting steps

This article shows how to do network card testing using the Support Live Image (SLI).

This article provides information about how to create a bootable USB drive from and OS ISO file for manual installation.

The Dell Nautilus Firmware Update Utility is flexible and simple to use as it contains all the latest, relevant firmware updates for hard drives in your Dell server.

iDRAC update available to resolve this fan problem seen on some PowerEdge servers.

Dell OS and Applications Solutions on Dell TechCenter - Project Sputnik, Microsoft Windows, Red Hat Linux, SUSE, Ubuntu, and more

How to Identify the physical slot number in iDRAC based off the device name in vSphere/VSAN.

This article provides information about how to update your system's firmware from the Lifecycle Controller on Dell servers.

This article explains how to check the iDRAC IP address on your Dell PowerEdge server using the LCD panel.

BIOS downgrading is blocked for certain memory configurations to prevent a system stop caused by a microcode issue in older versions.

This article takes about the different error messages on NVDIMM-N and self healing and does it differ from RDIMMs and LRDIMMs.

This article shows How To determine why a virtual machine powered off or rebooted by reviewing log files and host details to identify guest shutdowns, user or API requests, HA resets or system faults.

Dell iDRAC9 and iDRAC10 remediations for a Command Injection security vulnerability that could be exploited by malicious users to compromise the affected system.

If the LifeCycle Controller (LCC) is enabled but it is missing in the menu during the POST, it is possible that you must import the iDRAC license to enable it again.

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

This article describes how to find the iDRAC's current MAC address.