Removal
System Cover
Identify the system cover highlighted in blue.
Using a flat head or a Phillips screwdriver, rotate the lock counter clockwise.
Lift the latch till the system cover slides back.
Hold the cover on both sides, and lift the cover away from the system.
Airshroud
BOSS Module
Identify the BOSS module.
Pull the expansion card latch out of the slot.
Hold the BOSS module by its edges, pull the card until it disengages from the riser.
M.2 SSD card
Position the boss module over as shown.
Identify the M.2 SSD card highlighted in blue.
Loosen the screw that secures the M.2 SSD module.
lift the retention strap that secures the M.2 SSD module
Pull the M.2 SSD module away from the BOSS card.
Install
M.2 SSD card
Position the boss module over as shown.
Identify the M.2 SSD card location highlighted in blue.
Align the notch with the tab and insert the SSD into the connector on the BOSS card.
Secure the M.2 SSD module on the BOSS card with the retention strap.
Tighten the screw that secures the M.2 SSD module.
BOSS Module
Identify the BOSS module location.
Insert the BOSS module into the slot until its fully seated.
Push the expansion card latch into the slot to secure.
Airshroud
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the guide slots on the system.
Push the system cover latch down.
Using a flat head or Phillips screwdriver, rotate the lock clockwise.