Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

IOID Event Messages

IOID001

Message
The Input/Output Identity (I/O Identity) optimization feature is enabled.
Detailed Description
After the I/O Identity optimization feature is enabled, the time during boot to configure I/O Identity attributes using the Server Configuration Profile (Configuration XML) import feature will be significantly reduced.
Recommended Response Action
No response action required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID002

Message
The Input/Output Identity (I/O Identity) optimization feature is disabled.
Detailed Description
After the I/O Identity optimization feature is disabled, the time during boot to configure I/O Identity attributes using the Server Configuration Profile (Configuration XML) import feature will increase.
Recommended Response Action
No response action required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID003

Message
The Virtual Address Persistence Policy setting for Auxiliary powered devices is changed to arg1 .
Arguments
arg1 = restart type
Detailed Description
The Virtual Address Persistence Policy setting for Auxiliary powered devices is changed to the restart type identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID004

Message
Virtual Address Persistence Policy setting for Non-Auxiliary powered devices is changed to arg1 .
Arguments
arg1 = restart type
Detailed Description
The Virtual Address Persistence Policy setting for Non-Auxiliary powered devices is changed to the restart type identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID005

Message
Storage Initiator Persistence Policy setting is changed to arg1 .
Arguments
arg1 = restart type
Detailed Description
The Storage Initiator Persistence Policy setting is changed to the restart type identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID006

Message
Storage Target Persistence Policy setting is changed to arg1 .
Arguments
arg1 = restart type
Detailed Description
The Storage Target Persistence Policy setting is changed to the restart type identified in the message.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC         ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC              
CMC              

IOID110

Message
The virtual address of NIC arg1 Port arg2 is configured.
Arguments
arg1 = controller, arg2 = port
Detailed Description
The virtual address of NIC port identified in the message is configured.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID111

Message
Unable to configure the virtual address of NIC arg1 Port arg2 .
Arguments
arg1 = controller, arg2 = port
Detailed Description
The virtual address of the NIC port identified in the message could not be successfully configured because either the network port connection is not enabled or the NIC is not capable of Virtual Addressing.
Recommended Response Action
Verify that the network port is enabled and that the port has Virtual Addressing capability and then retry the operation.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 2 (Warning)
Trap/EventID
10770
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID112

Message
The initiator properties of the NIC arg1 Port arg2 are successfully configured.
Arguments
arg1 = Controller, arg2 = Port
Detailed Description
The initiator properties of the NIC port identified in the message are successfully configured.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID113

Message
Unable to configure the initiator properties of NIC arg1 Port arg2 .
Arguments
arg1 = Controller, arg2 = Port
Detailed Description
The initiator properties of the NIC port could not be configured because either iSCSI or FCoE partition of the network port is not enabled, or the network controller is not functioning.
Recommended Response Action
Make sure that the iSCSI or FCoE partition of the network port is enabled. Check whether or not the network controller is working and then retry the operation.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 2 (Warning)
Trap/EventID
10770
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID114

Message
The target settings properties of the NIC arg1 Port arg2 are successfully configured.
Arguments
arg1 = controller, arg2 = port
Detailed Description
The target setting properties of the NIC port identified in the message are successfully configured.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID115

Message
Unable to configure the target settings properties of the NIC arg1 Port arg2 .
Arguments
arg1 = controller, arg2 = port
Detailed Description
The target settings properties of the NIC port identified in the message could not be configured, because either iSCSI or FCoE partition of the network port is not enabled; or, the network controller is not functioning.
Recommended Response Action
Make sure that the iSCSI or FCoE partition of the network port is enabled. Check whether or not the network controller is working.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 2 (Warning)
Trap/EventID
10770
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID116

Message
Applying I/O Identity settings based on current persistence policy settings.
Detailed Description
The iDRAC has started to apply I/O Identity settings on NIC and FC HBA devices based on the current persistence policy settings.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID117

Message
The operation to apply I/O Identity settings based on current persistence policy settings has completed successfully.
Detailed Description
The iDRAC has applied I/O Identity settings on NIC and FC HBA devices. All the device configuration related to virtual addresses, initiator and target settings have been configured successfully according to the current persistence policy settings.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID118

Message
Unable to configure some or all I/O Identity settings based on current persistence policy settings.
Detailed Description
The iDRAC has applied I/O Identity Configuration on NIC and FC HBA devices. One or more of the setting configuration operations did not complete successfully.
Recommended Response Action
Review the previous log entries and identify the devices that did not successfully complete configuration operations. For the identified devices, do the following and then restart the server: 1) Make sure the device is installed properly. 2) Make sure the device has latest firmware installed. If the issue persists, contact your service provider.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 2 (Warning)
Trap/EventID
10770
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

IOID119

Message
FlexAddress is enabled on all NIC and FC HBA devices.
Detailed Description
The FlexAddress feature is enabled on the system. The iDRAC will assign FlexAddress defined MAC and WWN values to all the ports and/or partitions of bNDCs and mezzanine adapters of the system.
Recommended Response Action
No response action is required.
Category
Configuration (IOID = IO Identity Optimization)
Severity
Severity 3 (Informational)
Trap/EventID
10771
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔* ✔* ✔* ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\