Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

ENC Event Messages

ENC1

Message
arg1 was inserted.
Arguments
arg1 = Enclosure Management Module Name
Detailed Description
An Enclosure Management Module (EMM) has failed is inserted into the enclosure.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2296
OMSA Trap ID
95100;85100;75100;
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC10

Message
The arg1 asset name was changed.
Arguments
arg1 = Enclosure Name
Detailed Description
You have changed the enclosure asset name. This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2152
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC100

Message
arg1 is sending inconsistent reponses to the controller.
Arguments
arg1 = enclosure name
Detailed Description
The storage controller is not receiving a consistent response from the enclosure due to a firmware problem or an incorrect cabling configuration. If the cables are longer than the specified maximum length, the signals may be degraded.
Recommended Response Action
Turn off all the enclosures attached to the system, check if the cable configurations are correct. and reboot the system. If the problem persists, update the enclosure firmware to the latest supported version. Download the latest supported version of the firmware from the service provider. For more information about cable configuration, see storage enclosure documentation.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
OMSA Event ID
2300
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC     ✔   ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC     ✔        
CMC              

ENC11

Message
The arg1 service tag was changed.
Arguments
arg1 = enclosure name
Detailed Description
An enclosure service tag was changed. In most circumstances, this service tag should only be changed by the service provider.
Recommended Response Action
Make sure that the service tag was changed under authorized circumstances.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2153
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC12

Message
Communication resumed on arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
Communication with an enclosure has been restored. This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2162
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔   ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC13

Message
Unsupported configuration detected on arg1 . arg2 arg3
Arguments
arg1 = Enclosure Name, arg2 = EMM0 1, arg3 = EMM1 2
Detailed Description
An unsupported configuration was detected. The SCSI rate of the Enclosure Management Modules (EMMs) are not the same.
Recommended Response Action
Replace one of the EMMs with the matching SCSI rate EMM.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2173
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC14

Message
The number of enclosures connected on arg1 has exceeded the maximum limit supported by the controller.
Arguments
arg1 = controller name
Detailed Description
There are too many enclosures attached to the controller port. When the enclosure limit is exceeded, the controller loses contact with all enclosures attached to the port. This is an unsupported configuration.
Recommended Response Action
Remove the extra enclosures. Refer to the storage hardware documentation for maximum number of enclosures that can be connected.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2191
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC15

Message
An enclosure blink operation has initiated on arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2259
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC16

Message
An enclosure blink has ceased on arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2260
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC17

Message
An Enclosure Management Module (EMM) has been discovered on arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2291
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC18

Message
Communication with arg1 was lost.
Arguments
arg1 = enclosure name
Detailed Description
The controller has lost communication with an Enclosure Management Module (EMM). The cables may be loose or defective.
Recommended Response Action
Make sure the cables are attached securely. See the storage hardware documentation for more information on checking the cables. Reboot the system.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2292
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔   ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC19

Message
arg1 has failed.
Arguments
arg1 = Enclosure Management Module Name
Detailed Description
An Enclosure Management Module (EMM) has failed. The failure may be caused by a loss of power to the EMM. The EMM self-test may also have identified a failure. There may also be a firmware problem or a multi-bit error.
Recommended Response Action
Reseat the Enclosure Management Module (EMM). See the storage hardware documentation for information on replacing the EMM. Replace the EMM. Contact technical support if the issue persists.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2293
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC2

Message
arg1 was removed..
Arguments
arg1 = Enclosure Management Module Name
Detailed Description
An Enclosure Management Module (EMM) was removed.
Recommended Response Action
Reinsert the Enclosure Management Module (EMM). See the storage hardware documentation for information on replacing the EMM.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2297
OMSA Trap ID
95400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC21

Message
arg1 has been removed.
Arguments
arg1 = Enclosure elements name
Detailed Description
A device has been removed and the system is no longer functioning in optimal condition.
Recommended Response Action
Replace the device.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2295
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC22

Message
The arg1 has a bad sensor arg2 .
Arguments
arg1 = Enclosure Name, arg2 = args
Detailed Description
The enclosure has a bad sensor. The enclosure sensors monitor the fan speeds, temperature probes, and so on.
Recommended Response Action
Refer to the storage hardware documentation for more information.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2298
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC23

Message
arg1 - Issue with PHY arg2 .
Arguments
arg1 = enclosure name, arg2 = PHY data
Detailed Description
There is a problem with a physical connection or PHY in the enclosure idenfiied in the message.
Recommended Response Action
Contact your service provider.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2299
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔   ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC24

Message
Communication with arg1 is intermittent.
Arguments
arg1 = enclosure name
Detailed Description
The controller is not receiving a consistent response from the enclosure. There could be a firmware problem or an invalid cabling configuration. If the cables are too long, they degrade the signal.
Recommended Response Action
Power down all enclosures attached to the system and reboot . If the problem persists, upgrade the firmware to the latest supported version. Verify the cable configuration is valid. See the storage hardware documentation for valid cabling configurations.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2268
OMSA Trap ID
10400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC25

Message
arg1 has a hardware error.
Arguments
arg1 = enclosure name
Detailed Description
The enclosure or an enclosure component is in a Failed or Degraded state.
Recommended Response Action
Verify the health of the enclosure and its components. See the storage hardware documentation for more information. Contact technical support.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2301
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC26

Message
arg1 is not responding.
Arguments
arg1 = enclosure name
Detailed Description
The enclosure or an enclosure component is in a Failed or Degraded state. It is not responding to storage management commands or there is a connectivity problem between the controller and enclosure.
Recommended Response Action
Verify the health of the enclosure and its components. See the hardware documentation to for more information. Contact technical support.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2302
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC27

Message
SAS or SATA mixing of physical disks is not supported within the arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
The enclosure cannot support both SAS and SATA physical disks. Physical disks may be disabled. This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2303
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC28

Message
Enclosure Management Module (EMM) firmware version mismatch detected in arg1 . arg2 arg3 .
Arguments
arg1 = enclosure name, arg2 = EMM 0 version, arg3 = EMM 1 version
Detailed Description
The firmware on the EMM modules is not the same version. Both modules must have the same firmware version. This message is caused when you attempt to insert an EMM module that has a different firmware version than an existing module.
Recommended Response Action
Upgrade to the same version of the firmware on both EMM modules.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2311
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC29

Message
arg1 temperature has returned to normal.
Arguments
arg1 = Enclosure Name
Detailed Description
This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2353
OMSA Trap ID
105100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔   ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC3

Message
arg1 is shutdown.
Arguments
arg1 = Enclosure Name
Detailed Description
The physical disk enclosure is either hotter or cooler than the maximum or minimum allowable temperature range.
Recommended Response Action
Check for factors that may cause overheating or excessive cooling. For example, verify that the enclosure fan is working. You should also check the thermostat settings and examine whether the enclosure is located near a heat source. Make sure the enclosure has enough ventilation and that the room temperature is not too hot or too cold. Refer to the enclosure documentation for more diagnostic information.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 1 (Critical)
Trap/EventID
4337
OMSA Event ID
2112
OMSA Trap ID
85400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔   ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC30

Message
arg1 firmware download is in-progress.
Arguments
arg1 = Enclosure Name
Detailed Description
This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2354
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC31

Message
Firmware download on arg1 has failed.
Arguments
arg1 = Enclosure Name
Detailed Description
The system was unable to download firmware to the enclosure. The controller may have lost communication with the enclosure. There may have been problems with the data transfer or the download media may be corrupt.
Recommended Response Action
Attempt to download the enclosure firmware again. If problems continue, verify that the controller can communicate with the enclosure. Make sure that the enclosure is powered ON. Refer to the storage hardware documentation for information on checking the cables.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2355
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC32

Message
Storage Enclosure Processor (SEP) for arg1 has been rebooted.
Arguments
arg1 = Enclosure Name
Detailed Description
The SEP has been rebooted as part of the firmware download operation and will be unavailable until the operation completes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2368
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC33

Message
Redundancy on arg1 is normal.
Arguments
arg1 = Enclosure Name
Detailed Description
Data redundancy has been restored to an enclosure that previously suffered a loss of redundancy.
Recommended Response Action
This alert is provided for informational purposes.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2124
OMSA Trap ID
130400
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC4

Message
arg1 firmware mismatch.
Arguments
arg1 = Enclosure Name
Detailed Description
The firmware on the EMM modules is not the same version. It is required that both modules have the same version of the firmware. This alert may be caused when you attempt to insert an EMM module that has a different firmware version than an existing module.
Recommended Response Action
Download the same version of the firmware to both EMM modules.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2120
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC40

Message
A new enclosure was detected on arg1 .
Arguments
arg1 = controller name
Detailed Description
The controller detected a new enclosure. This is due either to a hot plug of an enclosure, or a power state change of an enclosure. In addition, this message is generated if the daisy chain order of the enclosures changes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2190
OMSA Trap ID
75100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔   ✔ ✔ ✔ ✔  
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC ✔ ✔*         ✔

ENC5

Message
Redundancy on arg1 is degraded
Arguments
arg1 = Enclosure Name
Detailed Description
One or more of the enclosure components has failed. For example, a fan or power supply may have failed. Although the enclosure is currently operational, the failure of additional components could cause the enclosure to fail.
Recommended Response Action
Identify and replace the failed component. To identify the failed component, select the enclosure in the tree view and click the Health subtab. Any failed component will be identified with a red X on the enclosures Health subtab. Alternatively, you can select the Storage object and click the Health subtab. The controller status displayed on the Health subtab indicates whether a controller has a failed or degraded component. See the enclosure documentation for information on replacing enclosure components and for other diagnostic information.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2122
OMSA Trap ID
130500
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC6

Message
Communication timeout on arg1 .
Arguments
arg1 = Enclosure Name
Detailed Description
The controller is unable to communicate with an enclosure. There are several reasons for communication loss. For example, there may be a bad or loose cable. An unusual amount of I/O may also interrupt communication with the enclosure. In addition, communication loss may be caused by software, hardware, or firmware problems, bad or failed power supplies, and enclosure shutdown.
Recommended Response Action
Check for problems with the cables. See the Cables attached correctly section for more information on checking the cables. You should also check to see if the enclosure has degraded or failed components. To do this, select the enclosure object in the tree view and click the Health subtab. The Health subtab displays the status of the enclosure components. Verify that the controller has the supported driver and firmware versions installed and that each Enclosure Management Modules (EMMs) are running the same version of supported firmware.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 2 (Warning)
Trap/EventID
4338
OMSA Event ID
2137
OMSA Trap ID
85300
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC7

Message
The arg1 alarm was enabled.
Arguments
arg1 = Enclosure Name
Detailed Description
You have enabled the enclosure alarm. This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2138
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC8

Message
The arg1 alarm was disabled.
Arguments
arg1 = Enclosure Name
Detailed Description
You have disabled the enclosure alarm.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2139
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

ENC9

Message
The arg1 asset tag was changed.
Arguments
arg1 = Enclosure Name
Detailed Description
You have changed the enclosure asset tag. This alert is provided for informational purposes.
Recommended Response Action
No response action is required.
Category
Storage (ENC = Storage Enclosr)
Severity
Severity 3 (Informational)
Trap/EventID
4339
OMSA Event ID
2151
OMSA Trap ID
85100
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC              
CMC ✔   ✔* ✔ ✔*    
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*            
CMC ✔ ✔*         ✔

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\