Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Event and Error Message Reference Guide for 13th Generation Dell PowerEdge ServersVersion 1.2

PDF

PFM Event Messages

PFM0001

Message
The value of arg1 is greater than the upper critical threshold.
Arguments
arg1 = sensor name
Detailed Description
The utilization value of the sensor identified in the message is higher than the upper critical threshold.
Recommended Response Action
Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
Category
System Health (PFM = System Performance Event)
Severity
Severity 1 (Critical)
No alerts are applicable for this message

PFM0002

Message
The value of arg1 is greater than the upper warning threshold.
Arguments
arg1 = sensor name
Detailed Description
The utilization value of the sensor identified in the message is higher than the upper warning threshold.
Recommended Response Action
Check the work load of the server and reduce the workload if necessary to bring the system performance into required ranges. For more information about the specified values, see the relevant product documentation available at the support site.
Category
System Health (PFM = System Performance Event)
Severity
Severity 2 (Warning)
Trap/EventID
2650
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC ✔ ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

PFM0003

Message
The value of arg1 is less than the lower warning threshold.
Arguments
arg1 = sensor name
Detailed Description
The utilization value of the sensor identified in the message is lower than the lower warning threshold value.
Recommended Response Action
The workload on server is almost zero. Consider assigning additional workloads to the server.
Category
System Health (PFM = System Performance Event)
Severity
Severity 3 (Informational)
No alerts are applicable for this message

PFM0004

Message
The value of arg1 is within specified limits.
Arguments
arg1 = sensor name
Detailed Description
The value of the sensor identified in the message is within specified limits.
Recommended Response Action
No response action is required.
Category
System Health (PFM = System Performance Event)
Severity
Severity 3 (Informational)
  Filter Visibility IPMI Alert SNMP Alert Email Alert Remote System Log WS Eventing  
iDRAC   ✔* ✔ ✔ ✔ ✔  
CMC              
  LC Log LCD OS Log Power Off Power Cycle Reset Chassis Event Proxy
iDRAC ✔*   ✔        
CMC              

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\