Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Changing expansion enclosure ID numbers

When an MD3060e Series expansion enclosure is connected to an MD Series storage array for the first time, an enclosure ID number is assigned and maintained by the expansion enclosure. This enclosure ID number is also shown in the MD Storage Manager and can be changed if required.

1. In the AMW, from the menu bar, select Hardware > Enclosure > Change > ID.
2. Select a new enclosure ID number from the Change Enclosure ID list.
   The enclosure ID must be between 0 and 99 (inclusive).
3. To save the changed enclosure ID, click OK.