Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Setting a password

You can configure each storage array with a password to protect it from unauthorized access. The MD Storage Manager prompts for the password when an attempt is made to change the storage array configuration, such as, when a virtual disk is created or deleted. View operations do not change the storage array configuration and do not require a password. You can create a new password or change an existing password.

1. In the EMW, select the relevant storage array and open the AMW for that storage array.
   The AMW for the selected storage array is displayed.
2. In the AMW, select the Setup tab, and click Set a Storage Array Password.
   The Set Password dialog is displayed.
3. If you are resetting the password, type the Current password.
   NOTE: If you are setting the password for the first time, leave the Current password blank.
4. Type the New password.
   NOTE: It is recommended that you use a long password with at least 15 alphanumeric characters to increase security. For more information about secure passwords, see Password Guidelines.
5. Re-type the new password in Confirm new password.
6. Click OK.
   NOTE: You are not prompted for a password when you attempt to change the storage array configuration in the current management session.