Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Locating physical disks in an SSD cache

1. In the AMW, select the Storage & Copy Services tab.
2. In the tree view, select the SSD cache and do one of the following:
   • From the menu bar, select Storage > SSD Cache > Blink.
   • Right click on the SSD cache and select Blink.
   The LEDs on the physical disks comprising the SSD cache blink.
3. After locating the physical disks, click OK.
   The LEDs stop blinking.
4. If the LEDs for the disk group do not stop blinking, from the toolbar in AMW, select Hardware > Blink > Stop All Indications.
   If the LEDs successfully stop blinking, a confirmation message is displayed.
5. Click OK.