Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Creating a Remote Replication group

1. In the AMW of the local storage array, select the Storage & Copy Services tab.
2. Select Copy Services > Remote Replication > Remote Replication > Replication Group > Create.
   The Create Remote Replication Group window is displayed.
3. In Remote replication group name, enter a group name (30 characters maximum).
4. In the Choose the remote storage array drop-down, select a remote storage array.
   NOTE: If a remote storage array is not available, you cannot continue. Verify your network configuration or contact your network administrator.
5. In the Connection type drop-down, choose your data protocol (iSCSI or Fibre Channel only).
6. Select View synchronization settings to set the synchronization settings for your Remote Replication group.
7. Click OK.
   The Remote Replication group is created.