Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

Changing iSCSI target discovery settings

1. In the AMW, select the Setup tab.
2. Select Manage iSCSI Settings.
   The Manage iSCSI Settings window is displayed.
3. Select the Target Discovery tab.
4. Select Use iSNS to activate iSCSI target discovery.
5. To activate iSCSI target discovery, you can use one of the following methods:
   • Select Obtain configuration automatically from DHCP server to automatically activate target discovery for IPv4 settings using the Dynamic Host Configuration Protocol (DHCP). You can also refresh the DHCP.
   • Select Specify Configuration, and type the IPv4 address to activate the target discovery.
   • Type the iSNS server IP address in the IPv6 settings area to activate the target discovery.
   NOTE: After you manually enter an IP address, you can also click Advanced to configure the customized TCP listening ports.

   NOTE: If you do not want to allow discovery sessions that are not named, select Disallow un-named discovery sessions.

   NOTE: Un-named discovery sessions are discovery sessions that are permitted to run without a target name. With an un-named discovery session, the target name or the target portal group tag is not available to enforce the iSCSI session identifier (ISID) rule.
6. Click OK.