Dell EMC PowerVault MD 34XX/38XX Series Storage Arrays Administrator's Guide

PDF

Locating storage arrays

You can use the Blink option to physically locate and identify a storage array. To locate the storage array:

Select the relevant storage array and do one of the following:
- In the EMW, right-click the appropriate storage array, and select Blink Storage Array.
- In the AMW, select the Setup tab, and click Blink Storage Array.
- In the AMW, select Hardware > Blink > Storage Array.
The LEDs on the physical disks in the storage array blink.
After locating the storage array, click OK.
The LEDs stop blinking.
If the LEDs do not stop blinking, select Hardware > Blink > Stop All Indications.