Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Schedule Support Bundle Collection Configuration

Description

This command specifies a schedule for collecting support bundle data.

NOTE: This command must be run from the command line. It cannot be run in the MD Storage Manager script editor.

Syntax

SMcli -supportBundle schedule (enable|disable) (all|
                                 storageArrayName)
                                 [data=
                                 pathName]
                                 [startTime=
                                 HH:MM]
                                 [startDate=
                                 MM:DD:YY]
                                 [endDate=
                                 MM:DD:YY]
                                 (daysOfWeek={} | months={}
                                 (onDays={} |
                                 weekNumber=(First|Second|Third|Fourth|Last) dayOfWeek=(Sunday|Monday|Tuesday|Wednesday|)

Parameters

Parameter	Description
`enable`	Enable automatic collection of support bundles when a critical MEL event is detected.
`disable`	Disable automatic collection of support bundles where the feature was previously enabled.
`all`	Apply the command to all storage arrays detected from the host.
`storageArrayName`	Apply the command to the named storage array.
`data`	Store the data generated by the command at the location specified by the pathName.