Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Show Disk Group Import Dependencies

Description

This command shows a list of dependencies for the physical disks in a disk group that you want to move from one storage array to a second storage array.

Syntax

show diskGroup [
                                 diskGroupName] importDependencies
                                 [cancelImport=(TRUE | FALSE)]

Parameters

Parameter	Description
`diskGroup`	Number of the disk group for which to display information. You must put brackets ([ ]) around the disk group number.
`cancelImport`	The setting to spin the physical disks back down after the disk group dependencies have been read. To spin down the physical disks, set this parameter to `TRUE`. To let the physical disks stay spinning, set this parameter to `FALSE`.

NOTE: This command returns the dependencies of a specific disk group, which must be in an Exported state or a Forced state. If a decision is made to retain the listed dependencies, then the cancelImport parameter can be enforced to spin the physical disks back down. You must run the show diskGroup importDependencies command before you run the start diskGroup import command.