Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Suspend Remote Replication

Description

This command suspends a Remote Replication operation.
  • NOTE: This command is valid only with Fibre Channel storage arrays.

Syntax

suspend remoteReplication (primary
                                 [
                                 primaryVirtualDiskName] |
                                 primaries [
                                 primaryVirtualDiskName1 ...
                                    primaryVirtualDiskNameN
                                 ])
                                 writeConsistency=(TRUE | FALSE)
                              

Parameters

Parameter Description
primary or primaries The name of the virtual disk for which you want to suspend operation. Enclose the virtual disk name in square brackets ([ ]). If the virtual disk name has special characters, also enclose the virtual disk name in double quotation marks (“ ”).
writeConsistency This parameter defines whether the virtual disks identified in this command are in a writeconsistency group or are separate. For the virtual disks in the same write-consistency group, set this parameter to TRUE. For the virtual disks that are separate, set this parameter to FALSE.
  • NOTE: If the writeConsistency parameter is set to TRUE, the virtual disks must be in a write-consistency group (or groups). This command suspends all write-consistency groups that contain the virtual disks. For example, if virtual disks A, B, and C are in a write-consistency group and they have remote counterparts A’, B’, and C’, the command:
    suspend remoteReplication virtualDisk [“A”]
                                              writeConsistency=TRUE
                                           
    suspends A-A’, B-B’, and C-C’. If you have a write-consistency group 1={A, B, C} and write-consistency group 2={D, E, F}, the command:
    suspend remoteReplication virtualDisks [“A” “D”]
                                              writeConsistency=TRUE
                                           
    suspends both write-consistency groups.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"