Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

Show SNMP Communities

Description

This command returns information about the Simple Network Management Protocol (SNMP) communities defined for the storage array. SNMP communities are collections of devices, such as routers, switches, printers, and storage devices grouped together to manage and monitor the devices. this command displays the following information about the SNMP communities.

The total number of communities
The total number of trap destinations
The names of the SNMP communities

Syntax

show (allSnmpCommunities | 
                                 snmpCommunity communityName="snmpCommunityName" | 
                                 snmpCommunities ["snmpCommunityName1" ... "snmpCommunityNameN"]) 
                                 [summary]

Parameters

Parameter	Description
`allSnmpCommunities`	This parameter returns information about all of the SNMP communities in the storage array.
`communityName`	The name of the SNMP community for which you want to retrieve information. Enclose the SNMP community name in double quotation marks (" ").
`snmpCommunities`	The names of several SNMP communities for which you want to retrieve information. Enter the names of the SNMP communities using these rules: Enclose all of the names in square brackets ([ ]). Enclose each of the names in double quotation marks (" "). Separate each of the names with a space.
`summary`	This parameter returns a list of the total number of SNMP communities and the total number of SNMP trap destinations. When you use this parameter information detail is omitted.

Notes

SNMP supports one or more communities to which managers and managed devices belong. SNMP requests contain a community string in the data packets passed over the network that acts as a crude password. SNMP agents can reject GET or SET requests with an unrecognized community string. A community string is also included in TRAP notifications sent from agent to manager as well.

The embedded SNMP agent supports both IPV4 and IPV6.

This command returns SNMP community information similar to this example.

                                    SNMP COMMUNITIES------------------------------ SUMMARY 
                                    Total SNMP Communities: 2 
                                    Total SNMP Trap Destinations: 1 
                                    DETAILS 
                                    SNMP Community: TestComm1 
                                    SNMP Permission: Read Only 
                                    		Associated Trap Destination: 
                                    		Trap Receiver IP Address: 10.113.173.133 
                                    		Send Authentication Failure Traps: true 
                                    SNMP Community: Test2 
                                    SNMP Permission: Read Only Associated Trap Destination:

Minimum Firmware Level

8.10

Bienvenido

Bienvenido a Dell