Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Show Remote Replication Group Synchronization Progress

Description

This command displays the progress of periodic synchronization of the remote replication group between the local and remote storage array. This command returns the progress of data synchronization on all of the replicated pairs within the remote replication group. This command shows the progress as a percentage of data synchronization that has been completed.

NOTE: There are two types of synchronization: initial synchronization and periodic synchronization. Initial remote replication group synchronization progress is displayed in the Long Running Operations dialog and by executing the show storageArray longRunningOperations command.

Syntax

show  asyncRemoteReplicationGroup ["
                                 asyncRemoteReplicationGroupName"]
                                 [synchronizationProgress]

Parameters

Parameter

Description

asyncRemoteReplicationGroup

The name of the remote replication group for which you want to check the synchronization progress. Enclose the remote replication group name in square brackets ([ ]). If the remote replication group name has special characters, you also must enclose the remote replication group name in double quotation marks (" ") inside square brackets. If the remote replication group name consists only of numbers, such as "1002," you also must enclose the remote replication group name in double quotation marks (" ") inside square brackets.

synchronizationProgress

Use this optional parameter to display the periodic synchronization progress of the remote replication group.