Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Show Disk Group

Description

This command returns the following information about a disk group:

Status (online or offline)
Physical disk type (SAS)
Enclosure loss protection (yes or no)
Current owner (RAID controller module 0 or RAID controller module 1)
Associated virtual disks and free capacity
Associated physical disks

NOTE: You can use the free capacity area value when you create a virtual disk based on the free capacity of a disk group. For a description of how to use the free capacity value, see the create virtualDisk command on Create RAID Virtual Disk (Free Capacity Base Select).

Syntax

show diskGroup [
                                 diskGroupNumber]

Parameter

Parameter	Description
`diskGroup`	Number of the disk group for which to display information. You must put brackets ([ ]) around the disk group number.