Omitir para ir al contenido principal
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.

Dell PowerVault MD 32XX/36XX Series Storage Arrays CLI Guide

PDF

Stop Snapshot (Legacy)

Description

This command stops a copy-on-write operation.

Syntax

stop snapshot (virtualDisk [
                                 virtualDiskName] | 
                                 virtualDisks [
                                 virtualDiskName1... virtualDiskNameN])
                              

Parameters

Parameter Description
virtualDisk or virtualDisks The name of the specific virtual disk for which you want to stop a copy-on-write operation. You can enter more than one virtual disk name.
Enclose the virtual disk names using one of these forms:
  • On a Windows command line: \"virtualDiskName\"
  • In a Windows script engine window: ["virtualDiskName"]
  • On a Linux command line: \"virtualDiskName\"
  • In a Linux script engine window: [\"virtualDiskName\"]

Notes

Names can be any combination of alphanumeric characters, underscore (_), hyphen (-), and pound (#). Names can have a maximum of 30 characters.

One technique for naming the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk is to add a hyphenated suffix to the original base virtual disk name. The suffix distinguishes between the snapshot (legacy) virtual disk and the snapshot (legacy) repository virtual disk. For example, if you have a base virtual disk with a name of Engineering Data, the snapshot (legacy) virtual disk can have a name of Engineering Data-S1, and the snapshot (legacy) repository virtual disk can have a name of EngineeringData- R1.

If you do not choose a name for either the snapshot (legacy) virtual disk or the snapshot (legacy) repository virtual disk, the MD storage management software creates a default name by using the base virtual disk name. An example of the snapshot (legacy) virtual disk name that the RAID controller modules might create is, if the base virtual disk name is aaa and does not have a snapshot (legacy) virtual disk, the default snapshot (legacy) virtual disk name is aaa-1. If the base virtual disk already has n-1 number of snapshot (legacy) virtual disks, the default name is aaa- n. An example of the snapshot (legacy) repository virtual disk name that the RAID controller module might create is, if the base virtual disk name is aaa and does not have a snapshot (legacy) repository virtual disk, the default snapshot (legacy) repository virtual disk name is aaa- R1 . If the base virtual disk already has n-1 number of snapshot (legacy) repository virtual disks, the default name is aaa-R n.


Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"