How to Remove Raid Card for PowerEdge R820

This video will demonstrate the removal procedure of Raid Card for PowerEdge R820.

Removing The Integrated Storage Controller Card:
1. Turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet and peripherals.
2. Open the system.
3. Lift the expansion-card latch out of the slot.
4. Pull and slide the card out from the connector on riser card 3.
5. Disconnect the cables connected to the card:
a. Press down and hold the metal tab on the SAS cable connector.
b. Pull the SAS cable out of the connector.
6. Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.