Cyber Recovery: Manglende konfiguration af MultiLink til CyberSense – kan ikke udføremarmarshal-system i go-struct-feltet

Summary: Efter opgradering til Cyber Recovery 19.13 og CyberSense 8.2.0-1.12 kan du ikke fuldføre forsøg på at konfigurere MultiLink for at analysere kopier.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Cyber Recovery Mutlilink-konfigurations-GUI viser følgende:

Multilink-konfigurationsfejl i Cyber Recovery
I logfilen/edge/edge.log kan man se følgende, der matcher skærmbilledet i Brugergrænsefladen til Multilink-konfiguration i Cyber Recovery:
  
[XXXX-05-10 13:32:20.393] [DEBUG] [edge] [restapi_client.go:139 CallCRRESTAPI()] : Perform request.Get path=https://apps:9095/irapi/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/csnetworkinfo
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:148 CallCRRESTAPI()] : status = 400 Bad Request
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:321 GetCRResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:328 GetCRResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:149 CallCRRESTAPI()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:55 CallRESTAPIHeader()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:295 HandleRESTAPIResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:303 HandleRESTAPIResponse()] : REST status code :400
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [restapi_client.go:312 HandleRESTAPIResponse()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmars
hall response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:313 HandleRESTAPIResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [edge.go:1474 GetMultiLinkNetInterfaces()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall
response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:27 JSONError()] : Entering
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [jsonerr.go:40 JSONError()] : 500 : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall response
to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:44 JSONError()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [edge.go:1476 GetMultiLinkNetInterfaces()] : Exiting
[XXXX-05-10 13:32:20.519] [INFO] [edge] [restauth.go:99 func1()] : GET /cr/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/multilinknetinterfaces End GetMultiLinkInterfaces Elapsed=127.933414ms

Cause

Der var et softwareproblem i version 8.2.0-1.12. Dette var med REST API Cyber Recovery, der bruger til at registrere alle CyberSense-grænseflader.
Den returnerer et ugyldigt json-svar, hvis en eller flere af CyberSense-grænsefladerne er ikke konfigureret eller ikke aktiveret.
Cyber Recovery kunne ikke parse dette svar, og fejlen, der blev set i både logfilerne og Cyber Recovery vises.

Resolution

Dette problem behandles i CyberSense 8.2.0-1.23.
Article Properties
Article Number: 000214851
Article Type: Solution
Last Modified: 14 Sept 2023
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.