Cyber Recovery: Hvis du ikke konfigurerer Multilink for CyberSense – kan ikke oppheve skalering av array i go-struct-feltet

Summary: Når du har oppgradert til Cyber Recovery 19.13 og CyberSense 8.2.0-1.12, kan du ikke fullføre forsøk på å konfigurere Multilink for å analysere kopier.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Konfigurasjonsgrensesnittet for Cyber Recovery Mutlilink viser følgende:

Konfigurasjonsfeil med flere koblinger i Cyber Recovery
Innenfor log/edge/edge.log kan du se følgende som samsvarer med skjermbildet i multilink-konfigurasjonsgrensesnittet i Cyber Recovery:
  
[XXXX-05-10 13:32:20.393] [DEBUG] [edge] [restapi_client.go:139 CallCRRESTAPI()] : Perform request.Get path=https://apps:9095/irapi/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/csnetworkinfo
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:148 CallCRRESTAPI()] : status = 400 Bad Request
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:321 GetCRResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:328 GetCRResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:149 CallCRRESTAPI()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:55 CallRESTAPIHeader()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:295 HandleRESTAPIResponse()] : Entering
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:303 HandleRESTAPIResponse()] : REST status code :400
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [restapi_client.go:312 HandleRESTAPIResponse()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmars
hall response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [restapi_client.go:313 HandleRESTAPIResponse()] : Exiting
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [edge.go:1474 GetMultiLinkNetInterfaces()] : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall
response to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:27 JSONError()] : Entering
[XXXX-05-10 13:32:20.519] [ERROR] [edge] [jsonerr.go:40 JSONError()] : 500 : Failed to retrieve network information for CyberSense with ID : XXXXXXXXXXXXXXXXXXXXXXXX. Cannot unmarshall response
to CyberSense network information response. json: cannot unmarshal array into Go struct field .speed of type string
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [jsonerr.go:44 JSONError()] : Exiting
[XXXX-05-10 13:32:20.519] [DEBUG] [edge] [edge.go:1476 GetMultiLinkNetInterfaces()] : Exiting
[XXXX-05-10 13:32:20.519] [INFO] [edge] [restauth.go:99 func1()] : GET /cr/v7/apps/XXXXXXXXXXXXXXXXXXXXXXXX/multilinknetinterfaces End GetMultiLinkInterfaces Elapsed=127.933414ms

Cause

Det var et programvareproblem i 8.2.0-1.12-versjonen. Dette var med REST API Cyber Recovery for å oppdage alle CyberSense-grensesnittene.
Den returnerer et ugyldig json-svar hvis ett eller flere av CyberSense-grensesnittene ikke er konfigurert eller ikke aktivert.
Cyber Recovery kunne ikke analysere dette svaret, og feilen som vises i både loggene og Cyber Recovery vises.

Resolution

Dette problemet er løst i CyberSense 8.2.0-1.23.
Article Properties
Article Number: 000214851
Article Type: Solution
Last Modified: 14 Sept 2023
Version:  2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.