VNX: How to delete Clone Private LUNs

Summary: VNX: How to delete Clone Private LUNs.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

  1. Log in to Unisphere. Select the affected array by using the pull-down bar to the left of "Dashboard" or by selecting it in the "Systems by Severity" box in the upper left of the display.

  2. Go to the tab labeled Data Protection.

  3. Along the right-hand side, click Configure Clone Settings
    Data Protection tab in EMC Unisphere

  4. Click the wanted Clone Private LUN from the list of Clone Private LUNs

  5. Click Remove

Note: All associated Clones and Clone Groups must be fractured and removed before deleting the Clone Private LUN.

 

Affected Products

VNX1 Series

Products

VNX1 Series, VNX2 Series, VNX/VNXe
Article Properties
Article Number: 000022409
Article Type: How To
Last Modified: 22 Oct 2025
Version:  5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.