VNX: How to enter Command Line Interface (CLI) via the Unisphere Manager GUI. (User Correctable)
Summary: Steps on how to access CLI via Unisphere.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
How to get to CLI in Unisphere
1. Log into Unisphere.
2. Select the System tab.
3. Go to Control Station CLI at the bottom right pane.
4. Select Run Command right below that.
5. The command page opens for entering commands.
1. Log into Unisphere.
2. Select the System tab.
3. Go to Control Station CLI at the bottom right pane.
4. Select Run Command right below that.
5. The command page opens for entering commands.
Affected Products
VNX/VNXeProducts
VNX/VNXeArticle Properties
Article Number: 000022420
Article Type: How To
Last Modified: 24 Sep 2024
Version: 3
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.