Dell Unity: Software-upgrade mislukt met healthcheckfout: check_replication
Summary: Een Dell Unity-software-upgrade mislukt met 'Health Check Error: check_replication_health_2, check_replication_health_5'. De software-update kan ook mislukken met 'Waarschuwing: check_replication_health_4'. ...
Symptoms
Statuscontroleberichten en gebeurtenissen upgraden Waarschuwing:
FoutenThe health check has failed. One or more remote system problems were detected on the system and causes the upgrade to fail. Record the error code and search the Dell Online Support website for available support options.[Error Code: platform::check_replication_health_2]-------------------------------------Errors-------------------------------------Platform: Check replication healthSync is in progress for the following replication sessions: * VRT_xxxx_xxAction : Cannot perform upgrade while a sync is in progress for a replication session. Please wait until the sync completes or pause the sessions and retry the upgrade.ERROR_CODE=platform::check_replication_health_5|Error|VRT_xxxx_xxEvents > Alerts > Information: The remote system connection is out of date. Update the connection with the latest interface changes.WarningsOne or more replication sessions are configured to be auto-synchronized. This could cause a problem during an upgrade. Pause the replication sessions prior to starting the upgrade and resume them after completing the upgrade. [Warning Code=platform::check_replication_health_4]/nas/log/check_health.161031-152020.log------------------------------------Warnings------------------------------------Platform: Check replication healthThe following replication sessions should be paused prior to starting the upgrade: * rep_sess_res_84_res_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx * rep_sess_res_85_res_2_FNMxxxxxxxxxxx_FNMxxxxxxxxxxxAction : Since these are auto-synchronized sessions, they could get into critical state if replication attempts a sync during the upgrade. To avoid this issue, please pause these sessions before starting the upgrade and resume them after the upgrade.ERROR_CODE=platform::check_replication_health_4|Warning|rep_sess_nas_44_nas_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx* rep_sess_res_84_res_1_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx* rep_sess_res_85_res_2_FNMxxxxxxxxxxx_FNMxxxxxxxxxxx-------------------------------------Errors-------------------------------------Platform: Check replication healthThe following remote systems have health problems: * FNMxxxxxxxxxxxAction : Escalate this issue through your support organization and provide this output in your escalation.ERROR_CODE=platform::check_replication_health_2|Error|FNMxxxxxxxxxxx--------------------------------------------------------------------------------UPGRADE CANNOT PROCEED.Check Result: Errorspb:~$ uemcli /remote/sys -id RS_1 show -detail |grep Health Health state = Minor failure (15) Health details = "Update the remote system connection to pick up the latest interface changes on the local and remote systems."
Unisphere > Replicatieverbindingen >
die met de muis langs de gevarendriehoek zweven, tonen:"Update the remote system connection to pick up the latest interface changes on the local and remote systems."
Cause
- Voor het mislukken van de healthcheckfout is de onderliggende oorzaak dat de verbinding tussen de twee (2) replicatiesystemen moet worden bijgewerkt. De replicatieverbindingen moeten handmatig worden bijgewerkt wanneer de storageprocessors (SP's) opnieuw worden opgestart of de systeembeheerservice opnieuw is gestart.
- Voor de healthcheckwaarschuwing moeten de replicatiesessies op de NAS-server van het bronsysteem en elk afzonderlijk bestandssysteem worden onderbroken .
OPMERKING: Als u de bronzijde onderbreekt, wordt de replicatiestatus aan de doelzijde gewijzigd in onderbroken.
Resolution
Voor het waarschuwingsbericht pauzeert u alle replicatiesessies van het bronsysteem, waardoor alle respectieve doelsessies worden onderbroken:
Oplossing: Alle bronreplicatiesessies
onderbrekenUnisphere-replicatiesessies >>> Meer acties > Pauzeren
Werk uw replicatieverbindingen > bij voor de fout met
de foutmelding:Oplossing: Externe verbinding bijwerken vanaf bronsysteem
Unisphere-replicatieverbindingen >>> verifiëren en bijwerken
OPMERKING: De verbinding zou moeten worden bijgewerkt en een groen vinkje moeten weergeven.