This article may have been automatically translated. If you have any feedback regarding its quality, please let us know using the form at the bottom of this page.
Article Content
Instructions
如何使用 GUI 将 ME4 系列的“Disk Group Scrub Interval”更改为 360
打开浏览器,然后在位置栏中输入您的管理 IP
示例: https://100.98.99.98/
登录到生成的登录屏幕
在登录后,单击左上角的“System”选项卡
单击蓝色的“Action”按钮,然后选择“Advanced Settings”
在生成的弹出窗口中选择“System Utilities”选项卡
将“Disk Group Scrub Interval (hours):”的设置更改为 360,接着单击“Ok”
然后,您将看到“Processing”屏幕
完成后,在生成的“Success”屏幕上单击“OK”
您现在可以注销或完成其他任务
如何使用命令行界面 (CLI) 将 ME4 系列的“Disk Group Scrub Interval”更改为 360
通过 SSH 访问管理端口的 IP 地址,或使用登录凭据将数据以串行方式传输到控制器
输入“show advanced-settings”,以验证“Disk Group Background Scrub Interval”的当前设置
输出示例:
# show advanced-settings Disk Group Background Scrub: Enabled Disk Group Background Scrub Interval: 168 Partner Firmware Upgrade: Enabled Utility Priority: High SMART: Enabled Dynamic Spare Configuration: Disabled Enclosure Polling Rate: 5 Host Control of Caching: Disabled Sync Cache Mode: Immediate Missing LUN Response: Illegal Request Controller Failure: Disabled Supercap Failure: Enabled CompactFlash Failure: Enabled Power Supply Failure: Disabled Fan Failure: Disabled Temperature Exceeded: Disabled Partner Notify: Disabled Auto Write Back: Enabled Inactive Drive Spin Down: Enabled Inactive Drive Spin Down Delay: 15 Disk Background Scrub: Disabled Managed Logs: Disabled Single Controller Mode: Disabled Auto Stall Recovery: Enabled Restart on CAPI Fail: Enabled Large Pools: Enabled
# set advanced-settings background-scrub-interval 360 Success: Command completed successfully.(2020-10-19 9:59:31)
您可以使用“show advanced-settings”来确认更改
输出示例:
# show advanced-settings Disk Group Background Scrub: Enabled Disk Group Background Scrub Interval: 360 Partner Firmware Upgrade: Enabled Utility Priority: High